KT-4H850 8,500Lbs Heavy Duty 4-Post Car lift
*Concrete thickness must be at least 3.93” (100 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
- 8500lbs lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Single Point Manual Safety Lock Release
- Four mechanical locking devices, each equipped with both primary and secondary safety locks.
- Powerside column can be installed at both sides, front or rear.
- Non-skid diamond platforms and adjustable safety lock ladders.
- Comes with a caster kit for moving the lift around
- Comes with two drip trays and a jack tray
- High-quality hydraulic system with 110V/60HZ/1PH or 220V/60HZ/1PH (Optional)
| Lifting Capacity | 8500 lbs. (3850KG ) |
| Max. Lifting Height | 70.87″ / 1800mm |
| Lifting Time | 75s Up / 40s Down |
| Height of Posts | 83.66″ / 2125mm |
| Width Overall | 107.95″ / 2742mm |
| Length Overall | 198.43″ / 5040mm (with Ramps) |
| Inside Columns | 94.72″ / 2406mm |
| Min. Runway Height | 4.76″ / 121mm |
| Motor | 110VAC/60HZ/1PH |
| Net Weight | 1820lbs / 826KG |
SHIPPING POLICY:
- Freight shipping ONLY within the lower 48 states.
- Free shipping to commercial addresses or freight terminals.
- Residential address or limited access is charged by carrier extra cost.
- This item is too heavy so the customer should consider a forklift to unload it.
- Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.
