KT-4H150 Four Post Alignment Vehicle Lift 15,000lbs

*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

*Concrete thickness must be at least 3.93” (100 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

• 15000lbs lifting capacity

• CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested

• Single Point Manual Safety Lock Release

• Four mechanical locking devices, each equipped with both primary and secondary safety locks.

• Powerside column can be installed at both sides, front or rear.

• Non-skid diamond platforms and adjustable safety lock ladders.

• One 6000lbs rolling jack is included 

• Optional turn tables for wheel alignment for an additional cost

• High-quality hydraulic system, 3KW motor with 220V/60HZ/1PH or 110V/60HZ/1PH (Optional)