KT-H100 10000lbs vehicle lift
*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
- 10000lbs lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.
- Manual safety release from two sides
- Symmetric arm
- Base plate design
- Dual Hydraulic Chain-Drive Cylinders
- Rubber pad door opening protection
- Comes with extension support adaptor sets of +30mm and +120mm
- Feet-protection safety guardrails with tools box
- Top-level hydraulic system with 220V/60HZ/1PH and 110V/60HZ/1PH (Optional)
| Lifting Capacity | 10000lbs/4500KG |
| Max. Lifting Height | 70.75″/1800mm |
| Min. Height | 4.25″/110mm |
| Height Overall | 110.25″/2800mm |
| Width Overall | 142.25″/3614mm |
| Outside Column | 128″/3250mm |
| Inside Column | 110.25″/2800mm |
| Dirve-Thru Clearance | 94.5″/2400mm |
| Front Arm Reach (Min) | 30.75″/780mm (2 stages) |
| Front Arm Reach (Max) | 50.5″/1280mm (2 stages) |
| Rear Arm Reach (Min) | 30.75″/780mm (2 stages) |
| Rear Arm Reach (Max) | 50.5″/1280mm (2 stages) |
| Motor | 220VAC/60HZ/1PH/2.2KW |
| Net Weight | 1256lbs/570KG |
SHIPPING POLICY: Please read carefully
- Freight shipping ONLY within the lower 48 states.
- Free shipping to commercial addresses only. Remote areas may be charged extra for shipping. Please confirm before delivery.
- Shipping carrier may charge extra to residential Delivery.
- THE BUYER IS RESPONSIBLE FOR UNLOADING FROM THE TRUCK.
- Customer should consider Forklift and unloading dock service.
- The buyer should be also responsible for any re-delivery charges.
- Buyers should inspect delivered the products carefully before signing Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.
